DKC Series Sliding Gate Operator

Time:2009-05-24 10:19 From:未知 Author:admin Click: Times

DKC400 Gear wheel & magnetic limit switch

DKC400 Gear wheel & spring limit switch

DKC400 All In One( Motor + control + remote)

DKC400 Chain wheel & magnetic limit switch

Warning Light Photocell

Power supply: AC 220V/50Hz
Input power: 300W
Input torque: 14N.m
Output rate speed: 42rpm
Opening speed: 12m/min
Max. gate weight: 600Kg
Environmental temperature: -40°C to +75°C
Noise: ≤59dB
Gear-driver with Magnetic limit switch
The self-locking electromechanical gearmotor keeps the gate completely closed
Safety Obstruction Reverse ( an infrared beam must be installed )
Overheat & Overload dual protection
Emergency release key in case of power failure
Control panel wiring are available to safety device, alarm lamp & remote control

-------------------------------------------------------------------------------------------

DKC400WY Sliding Gate Operator

NEW R & D Product

DKC400W is used to drive sliding gate for residential use. It is featured with compact structure, powerful starting strength, capable of overwork at short time, overload protection. In case of power failure, manual key release design for manual purposes. It should be used with XF24 control unit of our company, its main function: Safety obstruction reverse (an infrared photocells must be installed); Soft start; Time-delay protection etc..

Technical parameters

Power supply: 220V, 50Hz

Rated output power of motor: 150W

Output shaft height: 58.5mm

Max. gate weight: 300Kg

Motor speed: 42rpm

Output torque: ≥14N·m

Noise: ≤56dB

Duty cycle: S2, 20 minutes

Environmental temperature: -40℃~+70℃

------分隔线----------------------------

Gate Operator Manufacturer: Xianfeng Machinery

XianFeng

DKC Series Sliding Gate Operator

NEW R & D Product